5-Pack DC12V 10A 1CH 433MHz Wireless RF Remote Control Relay Switch Receiver

Product Compatibility

To ensure this part fits your vehicle, please enter your vehicle's details below:

• Year: Select
• Make: Select
• Model: Select
• Submodel: Select
• Trim: Select
• Engine: Select

Clear All

This part is compatible with 0 vehicle(s).

Show all compatible vehicles

This part is compatible with 1 vehicle(s) matching

This part is not compatible with your recent searches.

Specifications

• Input Voltage: DC 10-14V
• Standby Current: Information Not Provided
• RF Frequency: 433 MHz
• RF Working Mode: Super heterodyne receiver
• Receiver Sensitivity: > 90 dBm
• Remote Control Distance: > 100 meters (in open environment)
• Decoding Way: MCU Software decoding
• Can Store Number of Remote Control: 50
• Supports Remote Control Types: Fixed code, learning code
• Channel: 1CH
• Multiple Working Modes: Jog/Non-Latched, Inter-lock/Latched, Self-lock/Self-Latched, Delay off
• Wiring Method: Fixed wiring terminal
• Working Voltage: DC 12V
• Output Current: 10A
• Rated Load: 10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC
• Output: Normally open, Common, Normally closed
• Dimension: 3.5 cm x 3 cm x 1.6 cm

Working/Output Way:

• Jog/Non-Latched: Press one button to turn ON. Release the same button to turn OFF. Requires one button remote control for one channel switch.
• Self-lock/Self-Latched: Press once to turn ON. Press again to turn OFF. Requires one button remote control for one channel switch.
• Inter-lock/Latched: Press one button to turn ON, press another button to turn OFF. Requires two buttons remote control for one channel switch.
• Delay: Press remote control relay, release the remote control to start timing, automatically closes the relay after 5s, 10s, or 15s.

Description:

• Jog: Press and release the learning button to set to working mode. Upon signal receipt, the LED flashes 5 times, goes off, and learning is successful within 3 seconds.
• Self-locking: Press the learning button twice to set to self-locking mode. Wait for the LED to turn off and then press the remote. Successful learning is indicated by LED flashing 5 times and turning off.
• Interlock: Press the learning button three times to set to interlock mode.
• Delay: After the relay is activated with the remote, timekeeping starts upon release, and the relay closes automatically after 5s, 10s, or 15s.

Package Includes:

• 5 x 12V 1CH 433MHz Wireless Relay Switch Receiver