N1201SA 37.5MHz-2.7GHz UV RF Vector Impedance Antenna SWR Analyzer Meter Tester Instrument

Recommended Use:

1. Warm up the instrument for at least 15 minutes to ensure measurement and calibration accuracy.
2. Use high-quality RF cables and connectors for best results.
3. The calibration cable is marked for convenient reuse without the need for recalibration.
4. The craftsmanship of test leads affects measurement accuracy. It is advised not to use excessively long test leads.
5. Ensure no strong wireless signals are present before measuring or calibrating to avoid interference.
6. If you're unfamiliar with impedance measurement, refer to the instructions and tutorials provided with the vector network analyzer. This instrument serves as a single-port vector network analysis device.

Startup and Shutdown:

• To turn on, hold down the CTRL key and press the power switch button.
• To shut down, in the boot state, press and hold the switch button for more than 2 seconds and release it.

Specifications:

• Brand: N1201SA
• Frequency Range: 34.375 MHz - 2.7 GHz
• Display: 2.4" TFT, 320x240 pixels (QVGA)
• Battery Capacity: 2000mAh (7.4Wh)
• Connector Type: SMA-K

Features:

1. High Accuracy: Impedance measurement error is less than the absolute value of impedance x 3% 0.1Ω, ensuring precise readings.
2. Versatility: Suitable for measuring resistance, impedance, SWR, and S11.
3. Wide Frequency Range: Suitable for use within 34.375 MHz - 2.7 GHz.
4. User-Friendly Display: 2.4" TFT with 320x240 QVGA resolution for clear visual readouts.
5. Durable Battery: 2000mAh battery provides reliable, long-lasting power.

Additional Specifications:

• Working Frequency: 140MHz - 2700MHz
• Frequency Steps: 1kHz
• Power Consumption: Charge current: 400mA
• Charge Port: USB
• Auto Power Off: Configurable from 5 to 60 minutes

Measured Parameters:

• Resistance
• Reactance
• Standing wave (SWR)
• S11
• Resolution Ratio: 4 digits
• Frequency Accuracy: Approximately 5ppm

Measurement Range:

• Impedance: 0.1 - 1000
• Standing Wave: 1.000 - 65
• S11(dB): 0dB to -60dB
• Operating Temperature: 0°C to 40°C

Package Includes:

• 1x Antenna Analyzer
• 1x Cable
• 1x Manual