Evalm
150W Digital SWR Power Meter, 1.6-50MHz, USB-C, High Accuracy, Multi-Display, Built-in Lithium Battery
150W Digital SWR Power Meter, 1.6-50MHz, USB-C, High Accuracy, Multi-Display, Built-in Lithium Battery
Estimated Delivery: -
Couldn't load pickup availability
Digital SWR Power Meter – 1.6-50MHz, 150W RF Power & SWR Tester
A compact digital SWR and RF power meter designed for monitoring transmitter output and antenna performance across the 1.6-50MHz frequency range. It measures forward power, SWR, antenna power, and efficiency, making it suitable for amateur radio stations, RF testing, antenna adjustment, and general transmitter monitoring.
Key Features
- Wide Frequency Range: Supports RF measurements from 1.6MHz to 50MHz.
- 150W Power Measurement: Measures RF power from 0.5W to 150W.
- Digital SWR Measurement: SWR measurement range from 1.0 to 99.9.
- Low Insertion SWR: Insertion SWR is ≤1.02 to minimize measurement-system impact.
- Multiple Display Modes: Five display interfaces can be selected with a single button press.
- SWR Alarm: Built-in buzzer alarm activates when SWR reaches 2.0 or higher. The alarm can also be disabled.
- USB Type-C: Supports charging, data communication, and firmware upgrades through USB Type-C.
- Rechargeable Battery: Built-in 3.7V/1000mAh lithium battery provides more than 50 hours of operation under typical conditions.
- Compact Design: Small enclosure is easy to integrate into an amateur radio station or portable RF test setup.
Measurement Functions
The meter provides the following information on its digital display:
- Forward RF Power
- SWR (Standing Wave Ratio)
- Antenna Power
- Antenna Efficiency
Five different display modes are available, allowing you to switch between measurement interfaces quickly during testing.
Specifications
| Frequency Range | 1.6-50MHz |
| Power Measurement Range | 0.5W-150W |
| SWR Measurement Range | 1.0-99.9 |
| Insertion SWR | ≤1.02 |
| Measurement Accuracy | Better than ±5% |
| SWR Alarm | Activates at SWR ≥2.0; alarm can be disabled |
| RF Connector | SL16-M or N; M type supplied by default |
| Display | Forward Power, SWR, Antenna Power, Efficiency |
| Battery | Built-in 3.7V/1000mAh rechargeable lithium battery |
| Charging / Communication | USB Type-C |
| Firmware Upgrade | Supported via USB |
| Battery Runtime | More than 50 hours |
| Dimensions | 88 × 38 × 64mm / 3.5 × 1.5 × 2.5in |
USB Type-C Firmware Upgrade
Firmware can be upgraded directly through the USB Type-C connection without requiring a separate programmer. This allows the meter to be updated when new firmware is available.
Rechargeable Battery
The built-in 3.7V/1000mAh rechargeable lithium battery provides more than 50 hours of operating time on a full charge, making the meter suitable for both bench testing and portable use.
Compact RF Test Instrument
With a compact 88 × 38 × 64mm enclosure, this SWR power meter takes up minimal space while providing essential RF measurements for transmitter and antenna testing.
Package Includes
- 1 × Digital SWR Power Meter
Notes
- Please verify the required RF connector type before ordering. The standard configuration uses the SL16-M connector.
- The specified 150W maximum power measurement range should not be exceeded.
- Measurement accuracy may vary depending on frequency, power level, and operating conditions.
